Flaker and Slicer with Hot Oil Heating

Flaker and Slicer with Hot Oil Heating

The flaker and slicer with hot oil heating is a rotary drying device with internal heating. If the material adheres to the drum wall during the drying process, the dried product is discharged by the scraper. Since the dryer has built-in broken blades, the materials entering the dryer can be immediately broken up, especially the materials with certain viscosity are broken into small pieces by large agglomerates. These pieces are in contact with hot air, which can bring out a part of the water and speed up the drying. This machine is suitable for drying a variety of granular, small, and high-humidity materials.

Product Details

Basic Info

Model NO.: XDT

Heating Mode: Transmission

Drum Number: Double

Type of Flow: Parallel Flow

Structure: Flaker

Type of Atomization: PLC Control

Specification: CE

HS Code: 84199090

Movement Way: Combined

Drying Medium: Air

Operational Method: Intermittent

Sprayer: Air-Flowing Type

Appearance of Dried Sample: Flakes, Slice

Trademark: Changzhou Fanqun

Origin: Changzhou, China 

Product Description

About Flaker and Slicer with Hot Oil Heating

The flaker and slicer with hot oil heating is a rotary drying device with internal heating. If the material adheres to the drum wall during the drying process, the dried product is discharged by the scraper. Since the dryer has built-in broken blades, the materials entering the dryer can be immediately broken up, especially the materials with certain viscosity are broken into small pieces by large agglomerates. These pieces are in contact with hot air, which can bring out a part of the water and speed up the drying. This machine is suitable for drying a variety of granular, small, and high-humidity materials.

Features:

It is characterized by high heat transfer coefficient, high thermal efficiency, small oxidative deterioration of the product and large processing capacity.

Immediately after entering the precrystallizer, the material is completely surrounded by hot air, which does not create a bond, and does not break up the chips and produce powder during the drying process. The temperature difference in the pre-crystallizer is almost zero, the crystallinity of the raw material is very uniform, and the drying effect is good.

The equipment has reasonable design, simple operation, energy saving and high efficiency, less running parts, high reliability and low daily maintenance cost.

Composition of XDT Flaker

XDT flaker is mainly composed of dryer body, scraper, driving system, water chilling unit, product discharge system and control system etc.

Inquiry

Related Products